now in your cart  0 items

Led Lights Bulbs News

Saturday 04 October, 2014 | TEXT_NEWS_RSS_FEED

The new LED headlamp technology, cures high beam "chronic illness"

by Administrator | post a comment

Night driving, if the vehicle drove across the high beam, then, you have twelve extremely careful, because the high beam of the vehicle, it will irritate your eyes, causing dazzling, blinding, affecting vision. According to the determination, human vision from daylight to dark, takes about two minutes to stabilize, which reverse dark adaptation time (after that the car will) generally about 10 seconds, during this time, the eye is difficult to distinguish the road as required and objects, it is prone to accidents. 

Although the use of the motor vehicle traffic laws nighttime lighting has clearly defined. Such as Article 48 Section Five "People's Republic of China on Road Traffic Safety Law Implementation Regulations", in the absence of the center divider or no centerline of the road, the vehicle should be in the car at night will come from the opposite direction of the vehicle 150 meters away switch to low beam lights, the narrow road, narrow bridge and non-motor vehicle should use low beam lights. 

However, there are still many drivers abuse the high beam, because some driver safety awareness is not strong, their own interests while ignoring the sight of the feelings of others. Obviously, some automakers are also aware that some people can not change the style of acting, then technically it solve the problem. 

Mercedes-Benz has recently announced that it will feature a new multi-beam LED headlights (MULTIBEAMLED) on 2015 models CLS models. The technology uses multiple LED light units, making the car high beam illumination to achieve high accuracy, thereby avoiding car driver would cause interference. 

Mercedes-Benz to understand from the description, even if the high beam and the other driving the car will also have to worry about safety issues resulting therefrom. 

Specifically, headlight mounting MULTIBEAMLED Benz developed several special LED modules, each independently controlled by the 24 LED light-emitting elements. These LED high beam beam emitting unit will come from. 

The key point is that the LED light-emitting unit can be automatically opened and closed according to the road conditions, in order to control the high-beam irradiation region, and the brightness. More simply, if the opposite to the car, MULTIBEAMLED headlight brightness will reduce exposure in certain areas, to allow truck drivers to avoid dizziness. 

How to determine road conditions automatically adjust the high beams do? The secret lies in the windshield behind the camera. The camera monitors the road information, and the information is fed back to the four control unit, the latter to 100 times / sec to a suitable frequency adjustment headlight illumination state. 

MULTIBEAMLED headlights magic does not stop there. Each headlight also contains a near-light mode to build the module, by four LED light units. If the camera monitor to appear in front of the curve, MULTIBEAMLED headlights automatically adjust the light deflection curve direction, the maximum deflection angle up to 12 degrees for easy driver clearer understanding of the road ahead. 

It is worth mentioning that Audi Matrix LED headlights (MatrixLED) and the principle of the Mercedes-Benz MULTIBEAMLED headlights approximation. 

Actual results MULTIBEAMLED headlamp market remains to be verified, at least be sure that the future face of those high beam enthusiasts when it need not be so frustrating.




Taught you how to choose the right LED lights

by Administrator | post a comment

A light bulb in the end how much knowledge, most people do not understand. Just know that every day the switch is pressed, the whole world will be opened, but in fact there are a lot of knowledge can be worthy of our careful to think, so when we are ready to buy a new light bulb, when there are a lot of learning. Only understand this knowledge, we can choose the best and most suitable bulbs. Today, we choose the bulb when many people will choose LED lights because it is the most environmentally friendly and most energy-efficient, so it drew consumers, little brother now I am ready to take your hands to choose the right LED lights. 

LED light-emitting diode is actually meant. Compared to the previous, LED lights, after several years of development, the price has come down to the consumer market, but have to say, LED lights are still more expensive than ordinary energy-saving lamps lot, but I must mention is the little brother, LED lights life a lot longer than the energy-saving lamps, which can be used continuously for 100,000 hours, 100 times faster than ordinary light bulbs; one energy-saving lamps LED lights are very energy only. It is because LED lamps have so many advantages, so although its price is high, but still be you and me welcome. 


Color 

Color is divided into two warm colors and cool colors, LED lights color temperature equally divided into two. Little brother I think, if you choose LED lights for the bedroom and living area, it is recommended that you choose the warm colors of LED lights. This hue lights with color similar, people feel very warm, feel very comfortable. The cool colors of LED lights is the most suitable for the kitchen and the basement, because these places require bright light to help us find things or to work. Another bathroom This place is very interesting, you can according to their own personality and furniture decoration to choose LED lamp shades, warm colors make you more relaxed in the bathroom, while cool colors will give you the "efficiency flu", how to select any arbitrary monarch . 

CRI 

CRI, CRI English abbreviation. Seems to be not very tall on it? Actually very simple, is used to display the color of the light source. Brother specifically how the layout is not listed here one by one, the parents can ask, "Girl" or "Columbia Valley." Understanding of the color LED lights, in order to accurately make a purchase, make your LED lights become your home the most harmonious component. 

Lumen 

This data should be most familiar data, shows how bright the light bulb in the end. It is not lumens, the greater the power it? Not the case, so this requires everyone in the choice of LED bulbs, be sure to look at the ratio of lumens numerical values ??with power, so that they can choose to power high brightness consumption of small products. If you accidentally come across such a good product, you'll buy it! 

Bulbs are home every day to be the most widely used in home appliances, but it is the most neglected of our appliances. With the advent of LED age. About LED lights, there are two points in the last little brother would like to share. The first is the LED light can be used with light regulator to change the color of light and shade and even, and the second is more secure compared to LED lamp energy saving lamps, energy-saving lamps because it is not relying on "gas" to light, so it's safety theory is the highest. The most critical is that it is too power, and if the general home use, then it's power consumption power consumption compared with the whole family, almost negligible, so we might as well try to buy when the bulb LED lights.





News for Friday 03 October, 2014


View all news for Friday 03 October, 2014 on one page




Recent News




News archive